CWM Touch Recovery v6.0.3.6 For Xiaomi Redmi 1S WCDMA

CWM Touch Recovery v6.0.3.6 For Xiaomi Redmi 1S WCDMA - CWM (ClockworkMod) Recovery, is a custom recovery which offers much more features compared to the original MI-Recovery 2.0.1 of Xiaomi Redmi 1S.

CWM Touch Recovery v6.0.3.6 For Xiaomi Redmi 1S WCDMA

Features CWM Recovery Xiaomi Redmi 1S :

Menu Navigation :
  • Navigate Up - Press Volume Up or Sliding Up
  • Navigate Down - Press Volume Down or Sliding Down
  • Select Menu - Press Power or Sliding Right
  • Go Back - Press "Go Back" or Sliding Left

Install Zip :
  • Choose Zip From SDcard
  • Install Zip From Sideload
  • Apply/SDcard/Update.zip
  • Toggle Signature Verification
  • Choose Zip From External SDcard

Wipe Data/Factory Reset

Wipe Cache Partition

Back and Restore :
  • Backup
  • Restore
  • Delete
  • Advanced Restore
  • Free Unused Backup Data
  • Choose Default Backup Format
  • Misc Nandroid Setting
  • Backup To External SDcard
  • Restore From External SDcard
  • Advanced Restore From External SDcard
  • Delete From External SDcard

Mount and Storage :
  • Mount/Cache
  • Mount/Data
  • Mount/sdcard
  • Mount/System
  • Mount/sd-ext
  • Format/Cache
  • Format/Data
  • Format/sdcard
  • Format/System
  • Format/sd-ext
  • Mount USB Storage

Advanced :
  • Reboot Recovery
  • Reboot Bootloader
  • Power Off
  • Wipe Dalvik Cache
  • Report Error
  • Key Test
  • Show Log
  • partition
  • Fix Permissions

Known Restrictions :
  • Mounting of USB and Internal Memory Not Working
  • Charging Not Working
  • Install Zip Can Not From External SDcard
  • The External SDcard is Affected By The Features Wipe Data, Backup and Restore Because On Redmi 1S The External SDcard Is Integrated Within Data Partition (/data/media/0)

Caution :
This is a safe process, but I am not responsible for anything bad that happens to your phone

Below You Find 4 Step By Step Guides :
  1. For Testing Purposes, Temporary Boot Into CWM Recovery Using Computer (PC) and Fastboot.
  2. Permanent Installation of CWM Recovery Using Computer and Fastboot
  3. Permanent Installation of CWM Recovery Using Mi-Recovery
  4. If Necessary Installation of Stock MI-Recovery 2.0.1

1.Temporary Boot Into CWM Recovery From Computer (PC) Via Fastboot For Testing Purposes

Prerequisites : 
Redmi 1S WCDMA
Developer Options Enabled - In Settings (About phone tap 5 times on Android version)
USB Debugging Enabled - In Settings - Developer Options
SDcard Inserted In Your Xiaomi Redmi 1S (And properly formatted inside Xiaomi Redmi 1S)
Adb and Fastboot Drivers Installed on Your Computer (PC) (use adb-setup from here, others might also work)
File cwm_hm1s.zip (Click Here)


Steps :
1.Boot Xiaomi Redmi 1S Into Fastboot Mode - With the phone switched off press the Volume DOWN and POWER buttons at the same time
2.Connect Xiaomi Redmi 1S to Computer (PC) Via USB Cable
3.Download file cwm_hm1s.zip to your PC and Extract it to the folder where fastboot.exe is located
4.Open a Command Prompt in the directory where fastboot.exe is located
5.Enter the following in the Command Prompt to temporary boot your Xiaomi Redmi 1S with the CWM recovery

fastboot boot cwm_hm1s.img
6.Wait until CWM has booted and start testing the CWM features
7.After you have finished testing you use 'reboot system now' from CWM main menu


2.Permanent Installation of CWM Recovery From Computer (PC) Via Fastboot

Prerequisites : 
Same as for 1.above

Steps :
Same as for 1.above, only difference is in step 5

5.Enter the following in the command prompt to install the CWM recovery permanently
fastboot flash recovery cwm_hm1s.img
3.Permanent Installation of CWM Recovery Using MI-Recovery 2.0.1

Prerequisites :
Xiaomi Redmi 1S WCDMA
Stock MI-Recovery 2.0.1
SDcard Inserted In Xiaomi Redmi 1S (And properly formatted inside Xiaomi Redmi 1S)
Download File signed_cwm_update.zip (Click Here)


Steps :
1.Download File signed_cwm_update.zip to your Computer (PC) Rename it to "update.zip" without quotes
2.Connect your Redmi 1S via USB
3.Copy File update.zip to the folder 'Computer\HM 1S\Internal storage' (root of internal storage)
4.Disconnect your Xiaomi Redmi 1S properly ('Safely remove hardware...')
5.Boot into Mi-Recovery by starting the Updater app, pressing the left options soft key and choosing from menu 'Reboot to Recovery mode'
6.Select and confirm 'English' (or Chinese if you are capable to understand)
7.Select and confirm 'Install update.zip to System' this will take a while
8.Select and confirm 'Reboot'


Next time when you reboot into recovery you will have CWM.

4.Installation of Stock MI-Recovery 2.0.1

Prerequisites : 
Xiaomi Redmi 1S WCDMA
Any Recovery
SDcard Inserted In Your Xiaomi Redmi 1S (And properly formatted inside Xiaomi Redmi 1S)
file signed_stock_recovery_update.zip (Click Here)


Steps : 
Download File signed_stock_recovery_update.zip to your Computer (PC)
Connect Xiaomi Redmi 1S to PC via USB Cable
Copy File signed_stock_recovery_update.zip to the folder 'Computer\HM 1S\Internal storage' (root of internal storage)
Disconnect Xiaomi Redmi 1S properly ('Safely remove hardware...')
Boot into your current recovery by starting the Updater app, pressing the left options soft key and choosing from menu 'Reboot to Recovery mode'
Install the file signed_stock_recovery_update.zip using the respective feature of your recovery

Reboot

Next time when you reboot into recovery you will again have the Stock MI-Recovery 2.0.1

Source : en.miui.com
Previous
Next Post »